Universal Washroom Control Installation Checklist (Onsite Pre-Install)

Installing a universal washroom control system or automatic door operator requires careful onsite planning. A proper pre-installation checklist helps avoid delays, extra labour, and unexpected costs, while ensuring accessibility and safety requirements are met.
Below is a practical onsite pre-installation checklist that can be used by technicians, property managers, and business owners before installation.

1. Site & Door Assessment

☐ Door material confirmed (wood, metal, or glass)
☐ Door width and height measured
☐ Door opening direction confirmed (left/right, inward/outward)
☐ Door operator location confirmed (inside & outside)
☐ Existing door closer present (brand/model if known)
☐ Door frame condition suitable for operator mounting

2. Accessibility & Code Considerations

☐ Door clearance meets accessibility requirements
☐ Required push force checked
☐ Washroom identified as universal or accessible washroom
☐ Emergency access requirements reviewed
☐ Signage location confirmed (Occupied / Vacant / Accessible)

3. Power & Electrical

☐ Power source available near the door (120V outlet or hardwired)
☐ Distance from power source to operator measured
☐ Electrical work required (Yes / No)
☐ Ceiling or wall space available for control box
☐ Backup battery required (Yes / No)
☐ Power plug or electrical wiring confirmed (Yes / No)

4. Control Devices

☐ Wave sensor or push button locations confirmed
☐ Inside activation device location confirmed
☐ Outside activation device location confirmed
☐ Emergency stop button required
☐ Door lock integration needed (electric strike or mag lock)
☐ Level lock or storage room requirement confirmed (Yes / No)

5. Safety Sensors

☐ Safety sensor required on pull side
☐ Safety sensor required on push side
☐ Mounting height and sensor angle checked
☐ Detection zone clear with no obstructions

6. Hardware & Accessories

☐ Automatic door operator model selected
☐ Locking mechanism confirmed (if applicable)
☐ Door closer compatibility checked
☐ Cables, conduits, and mounting brackets confirmed
☐ Extra accessories required (key switch, timer, signage)

7. Wall & Ceiling Conditions

☐ Wall type confirmed (drywall, concrete, or steel studs)
☐ Ceiling height measured
☐ Ceiling access available for wiring
☐ Core drilling required (Yes / No)

8. Site Conditions

☐ Washroom operational during installation (Yes / No)
☐ Installation time window confirmed
☐ Parking and equipment access confirmed

9. Client Confirmation

☐ Client reviewed installation plan
☐ Final device locations approved
☐ Installation date confirmed
☐ Warranty and maintenance explained

Why a Pre-Installation Checklist Matters

Using a pre-installation checklist for universal washroom control systems helps reduce installation delays, ensure accessibility compliance, improve safety and reliability, avoid unexpected electrical or structural issues, and provide a smoother experience for both clients and installers. If you are planning a universal washroom control or automatic door operator installation in St. Catharines or the Niagara Region, an onsite assessment using this checklist is strongly recommended. 

PDF version download version

Please contact DF computer-Universal Washroom Control Installation Team